Is The Message

Huawei Mate 30 Pro Display Design Revealed

13.07.2019
106

Huawei Mate 30 Pro has come up with various rumors for a while this time the display panel appeared. According to the published photo, the Mate 30 Pro comes with quite a big notch.

For a while, Huawei Mate 30 Pro’s rendering was designed for leaks. Although the camera design on the back was claimed to be round, a cover image appeared a few days ago showed us that the camera would come with a rectangular camera design.

Today, the screen panel of the Huawei Mate 30 Pro comes out alive in Weibo. For the Mate 30 Pro, which was previously claimed to have a camera hole, it seems that Huawei did not give up the 3D face recognition system and preferred a large notch like the Mate 20 Pro. The camera hole is a non-Pro Mate 30.

Huawei Mate 30 Pro Display Design Revealed

Considering the hole in the center of the notch is the handset, the Mate 30 Pro will have the same number of sensors and cameras as the Mate 20 Pro on the front. With a slightly thinner notch than the Mate 20 Pro, the Mate 30 Pro will come with an embedded fingerprint reader. So between 3D face recognition and fingerprint reader, users will be offered two options.

If the screen is used with a very thin frame, the Mate 30 Pro seems to have an almost endless display experience on the sides. Huawei is designed to be extremely curved front panel of the power and volume keys on the sides of the device is how to fit.

According to previous information, the Mate 30 Pro will be equipped with a 6.71-inch QHD + OLED display. Said to come with a refresh rate of 90 Hz Mate 30 Pro, the next generation Kirin 985 chipset and Balong 5000 5G modem will play the peak in terms of performance. The 4,200 mAh battery will also come with 55W fast charge support and 10W wireless reverse charge support.

What we know about the Huawei Mate 30 Pro is limited, and in the coming months we will be able to access more information and share it with you.

MAKE A COMMENT
COMMENTS - 0 COMMENTS

No comments yet.